Please click on an item below to download a PDF of our Specifications.
Fiberglass Boom Specifications Documents
FRP Document Archive
Coefficient Of Thermal Expansion
Large temperature gradients can be detrimental to the gel coat of FRP booms. Major swings in environmental conditions of the [...]
Understanding FRP Booms and their Use in Aerial Devices
Introduction The need to deliver electricity to the customer in an efficient and reliable manner has become an imperative for [...]
How FRP Pipe is Constructed
Three different processes are commonly used to fabricate fiber reinforced plastic pipe: filament winding, centrifugal casting and hand lay-up. Filament [...]
Thermosetting Resins Used in FRP Pipe
The following article is taken from Dow Chemical publication about FRP pipe. The materials and processes discussed are similar to [...]
Transverse Strength
Three 6×8 ID thin wall booms were tested to destruction and resulted in an ultimate strength (outside facing stress) of [...]
Ultrasonic Testing
The ultrasonic test for voids and delamination in fiberglass booms is necessary for booms produced by centrifugal casting and hand [...]
AC vs. DC
Waco Boom Co Ltd tests 100% DC on their fiberglass booms. They also have a HI-POT AC tester capable of [...]
Safety Factors
ANSI A92.2 dictates that for a non-ductile material (fiberglass, with about 3% elongation) must have a design stress of less [...]