Contact Us

Contact Waco Boom Company, Ltd.

Please feel free to contact us at any time using the info below.

Mailing Address:
Waco Boom Company, Ltd
P.O. Box 20667
Waco, Texas 76702

Shipping Address:
Waco Boom Company, Ltd.
481 Texas Central Parkway
Waco, Texas 76712

254.776.1695 – Phone
254.776.2556 – Fax

Quality Assurance – ext 2024
Marketing – ext 2010
Engineering – ext 2019
US Sales - ext 2010
Exports – ext 2019

You may also submit inquiries to specific departments via the form below.

cforms contact form by delicious:days

FRP Document Archive
- Coefficient Of Thermal Expansion
  By Waco Boom on May 12, 2011
  Large temperature gradients can be detrimental to the gel coat of FRP booms. Major swings in environmental conditions of the [...]
  
  Category: Reports
- Understanding FRP Booms and their Use in Aerial Devices
  By Waco Boom on April 3, 2011
  Introduction The need to deliver electricity to the customer in an efficient and reliable manner has become an imperative for [...]
  
  Category: General
- How FRP Pipe is Constructed
  By Waco Boom on April 2, 2011
  Three different processes are commonly used to fabricate fiber reinforced plastic pipe: filament winding, centrifugal casting and hand lay-up. Filament [...]
  
  Category: General
- Thermosetting Resins Used in FRP Pipe
  By Waco Boom on April 1, 2011
  The following article is taken from Dow Chemical publication about FRP pipe. The materials and processes discussed are similar to [...]
  
  Category: General
- Transverse Strength
  By Waco Boom on March 31, 2011
  Three 6×8 ID thin wall booms were tested to destruction and resulted in an ultimate strength (outside facing stress) of [...]
  
  Category: General
- Ultrasonic Testing
  By Waco Boom on March 30, 2011
  The ultrasonic test for voids and delamination in fiberglass booms is necessary for booms produced by centrifugal casting and hand [...]
  
  Category: Testing
- AC vs. DC
  By Waco Boom on March 28, 2011
  Waco Boom Co Ltd tests 100% DC on their fiberglass booms. They also have a HI-POT AC tester capable of [...]
  
  Category: General
- Safety Factors
  By Waco Boom on February 27, 2011
  ANSI A92.2 dictates that for a non-ductile material (fiberglass, with about 3% elongation) must have a design stress of less [...]
  
  Category: Safety
Social Network
- RSS Feed

Contact Waco Boom Company, Ltd.

FRP Document Archive

Social Network